% These are configuration information needed for the cruise.  They will be
% read in after yday is calculated, so if there is time dependant
% information it can be entered here (i.e. if the MAGVAR changes, or if the
% pitchoffset changes during the cruise).

% 23July1999 Modified for the setup up of the Stanford 600KHz ADCP on Wayne
% Martins boat for the Friday Harbour course.

% TIMES ARE IN PDT!!!!!!!
% machine is outputing in earth coordinates so most of these aren't used.

% pitch offset in degrees.  Positive indicates beam3 is higher than beam4
pitchoffset=0.0
pitch=pitch/100; % put pitch in degrees.

% roll offset in degrees.  Positive indicates beam2 is higher than beam1
rolloffset=0.0
roll = roll/100; % put roll in degrees.

% heading bias in degrees.  Positive indicates that beam three has been
% turned clockwise if you are looking from above the casing.
headbias = -45.0

% magnetic bias in degrees.  Positive for West Coast of NA.  Add East.
MAGVAR = 20

% depth of tranducer in meters...
xducerdepth=0.4572







