HOT-229 Optics Readme file



NOTE : AC-9 Still being calibrated at WetLabs



1/27/11

  Recharging DH4 & FRRF battery packs :

  Reconnected LISST battery pack : 1215
    - reset time
    - voltage = 8.62 V
    - set 'start condition' to 'mechnical switch' (st 3)
    - set 'stop condition' to 'mechnical switch' (sp 3)
    - set 'measurements to average' to '1' (ma 1)
    * note : no files on disk
    
  Checking FRRF: 1230
    - reset time
    - 14.74 V
    - reformatting flashcard

  Checking DH4 : 1250
    - time OK
    - disabling Port 2 (AC9)

  Cleaning AC-S Windows : 1430

  Calibrating AC-S :
    - temp = 22.1 Deg C
    - file : acs_11jan27_22_1.dat
    
    A659.0 :  .000
    A567.6 :  .002
    A480.3 :  .007
    C662.4 : -.007
    C570.7 : -.008
    C479.0 : -.007



1/28/11

  FRRF/DH4/LISST cast - in:212, down:219, up:239, out:250
    - depth    : ~190m using capstan
    - rate     : 10 m/min down, 20 m/min up
    - weather  : night, 1-2' swells, 13 knott winds from 90 deg
    - location : 22 40.398 N, 158 0.555 W
    - files    : pro1h229.bin, run.000, l0280210.dat


1/29/11

  FRRF/DH4/LISST cast - in:1409, down:1415, up:1434, out:1445
    - depth    : ~ 190m using ship's winch
    - rate     : 10 m/min down, ~20 m/min up
    - weather  : 1/8 clouds, 2-4' swells, 13 knott winds from 145 deg
    - location : 22 40.202 N, 157 58.293 W
    - files    : pro2h229.bin, run.001, l0291406.dat
      
  Checking LISST : 1530
    - time OK
    - voltage = 8.53 V
    - downloading : l0280210.dat, l0291406.dat

  Checking FRRF : 1545
    - time OK
    - voltage = 14.44 V
    - downloading : pro1h229.bin, pro2h229.bin

  Checking DH4 : 1620
    - time OK
    - voltage = 11.7 V
    - downloading : run.000, run.001


1/30/11

  Calibrating FL3 : 515
    - reset ECO time
    - file : h229eco1.raw

  Calibrating LISST : 545
    - file : h229cal1.asc, h229cal2.asc
             -- new DI --
             h229cal3.asc

  Disconnected LISST Battery Pack to conserve power