HOT-222 Optics Readme file


NOTE: Obtained 2 new LISST battery cores from Sequoia


6/7/10

  Recharged DH4 & FRRF battery packs.

  Replaced LISST battery pack : 1320
    - reset clock
    - voltage = 9.00 V
    - set 'start condition' to 'mechnical switch' (st 3)
    - set 'stop condition' to 'mechnical switch' (sp 3)
    - set 'measurements to average' to '1' (ma 1)
    - deleting files from memory
    - testing ... OK
    
6/8/10

  Checking FRRF : 1420
    - time OK
    - voltage = 14.70V
    - reformatting flashcard

  Checking LISST : 1433
    - time OK
    - voltage = 8.97 V
    - calibrating : file = h222cal1.asc
    * note : cleaned 3 times. Refilled calibration reservoir 6 times ... ARG!!!


6/9/10

  Cleaned AC-9/AC-S Windows : 600

  Calibrating AC-9 : 630
    - temp = 23.0 Deg C
    - file : ac9_10jun9_23_0.dat

  Calibrating AC-S : 650
    - temp = 23.4 Deg C
    - file : acs_10jun9_23_4.dat
    
    A659.1 : .005
    A569.0 : .010
    A479.4 : .022
    C661.4 : .076
    C571.0 : .099
    C480.1 : .109
    
  FRRF/DH4/LISST cast - in:1240, down:1246 up:1310, out:1325
    - depth    : ~190m using trawl winch
    - rate     : variable speed (~10 m/min down, ~20 m/min up)
    - weather  : 2/8 clouds, 8-12' swells, 25 knott winds from 105 deg
    - location : 22 44.921 N, 157 58.264 W
    - files    : pro1h222.bin, run.003, l1601234.dat
      
  Checking LISST : 1335
    - time OK
    - voltage = 8.89 V
    - downloading : l1601234.dat

  Checking DH4 : 1346
    - time OK
    - downloading : run.003
    * note : low voltage cutoff!
   
  Checking FRRF : 1400
    - time OK
    - voltage = 14.58V
    - downloading : pro1h222.bin
 
 
6/10/10

  FRRF/DH4/LISST cast - in:313, down:317, up:???, out:347
    - depth    : ~190m using trawl winch
    - rate     : variable speed (~10 m/min down, ~20 m/min up)
    - weather  : night, 8-12' swells, 23 knott winds from 100 deg
    - location : 22 44.548 N, 157 57.234 W
    - files    : pro2h222.bin, run.004, l1610308.dat

  Checking LISST : 405
    - time OK
    - voltage = 8.82 V
    - downloading : l1610308.dat
    
  Checking DH4 : 415
    - time OK
    - downloading : run.004
    * note : low voltage cutoff!

  Calibrating FL3 : 425
    - using cal file : FL3-654.dev
    - files : h222eco1.eng, h222eco1.raw
    * note  : ECO time incorrect
                host : 6/10/10 4:40:16     
                ECO  : 6/10/10 5:03:31
                
  Replaced BP Core : 545
    - recharging     

  Checking FRRF : 553
    - time OK
    - voltage = 14.49 V
    - downloading : pro2h222.bin    

  FRRF/DH4/LISST cast - in:1347, down:1352, up:1412 out:1423
    - depth    : ~190m using ship's trawl winch
    - rate     : variable speed (~10 m/min down, ~20 m/min up)
    - weather  : 7/8 clouds, 8-12' swells, 22 knott winds from 195 deg
    - location : 22 41.475 N, 157 58.634 W
    - files    : pro3h222.bin, run.005, l1611342.dat

  Checking LISST : 
    - voltage = 8.78 V
    - downloading : l1611342.dat

  Checking DH4 : 1440
    - time OK
    - voltage = 11.7 V
    - downloading : run.005

  Checking FRRF : 1608
    - time OK
    - voltage = 14.41V
    - downloading : pro3h222.bin

  Disconnected LISST Battery Pack to conserve power