HOT-197 Optics Readme file NOTE: FRRF back from calibration 11/29/07 - Charging MPAK and FRRF batteries 11/30/07 Checking MPAK : 1230 - voltage = 12.2V - reset time - reformatting flashcard - ready to sample Checking FRRF : 1330 - voltage = 14.47V - time OK - no files * NOTE: re-entered boot protocol #2 parameters 12/1/07 FRRF/MPAK night cast - in:339, down:346, up:413, out:440 - depth : ~250m using ship's capstan - rate : ~10 m/min down/up - weather : night, 3-4' swells, 11 knott winds from 240 deg - location : 22 44.979 N, 158 0.005 W - files : run.001, pro1h197.bin Cleaned AC-9 windows : 1247 Calibratting AC-9 : 1300 - temp = 25.0 deg C - files : run.002, 07dec01a1.dat, 07dec01c1.dat * NOTE : Had difficult time getting rid of all bubbles. 12/2/07 FRRF/MPAK cast - in:1331, down:1337, up:1402, out:1430 - depth : ~250m using ship's capstan - rate : ~10 m/min down/up - weather : 8/8 clouds, overcast & raining, , 20 knott winds from 330 deg, > 15' swells - location : 22 47.610 N, 157 56.558 W - files : run.003, pro2h197.bin Recharging MPAK battery: 1445 Checking FRRF : 1448 - voltage = 14.22V - time OK - downloading : pro1h197.bin, pro2h197.bin - reformatting flashcard 12/3/07 FRRF/MPAK cast - in:1220, down:1226, up:1250, out:1305 - depth : ~250m using ship's capstan - rate : ~10 m/min down, ~20 m/min up - weather : 8/8 clouds, overcast, 5 knott winds from 10 deg, > 20' swells - location : 22 41.596 N, 157 57.882 W - files : run.005, pro3h197.bin * After the cast, the ship captain insisted that we had to immediately leave and pump our sewage tanks. So we couldn't do the filter cast. Checking FRRF : 1630 - time OK - voltage = 14.17 V - downloading : pro3h197.bin Checking MPAK : 1655 - downloading : run.001, run.002, run.003, run.005 NOTES: The MPAK initially entered an error state when attempting to reformat it's flashcard. After power cycling several times, it worked OK for the remainder of the cruise. The FRRF appeared to work OK.