HOT-184 Optics Readme file 8/7/06 Charging FRRF & MPAK batteries 8/8/06 Checking FRRF : - time OK - voltage = 14.68V - flashcard OK 8/9/06 Cleaned AC-9 windows : 136 Checking MPAK : 211 - voltage = 11.9 V - reset time - formatting flashcard - ready to calibrate Calibrated AC-9 : 248 - A (1x), C (1x) - temp = 24.8 deg C - files : 06aug09a1.dat, 06aug09c1.dat, run.000 Continued charging MPAK Checking MPAK : 932 - voltage = 12.1 V MPAK/FRRF cast - in:1237, down:1243, up:1308, out:1334 - depth : ~250m using ship's capstan - rate : ~10 m/min down/up - weather : 2/8 clouds, 1' swells, 16 kt winds from 76 deg - location : 22 45.203 N, 157 57.880 W - files : run.003, pro1h184.bin 8/10/06 MPAK/FRRF night cast - in:151, down:156, up:221, out:246 - depth : ~250m using ship's capstan - rate : ~10 m/min down/up - weather : almost full moon, 1-2' swells, 19 kt winds from 80 deg - location : 22 46.033 N, 157 55.457 W - files : run.004, pro2h184.bin - notes : Batteries discharged on upcast Checking FRRF : 305 - voltage = 14.41V - downloading : pro1h184.bin, pro2h184.bin - reformatted flashcard Charging MPAK : Checking MPAK : 910 - voltage = 12.1V MPAK/FRRF cast - in:1010, down:1015, up:1040, out:1105 - depth : ~250m using ship's capstan - rate : ~10 m/min down/up - weather : 2/8 clouds, 1-2' swells, 17 kt winds from 76 deg - location : 22 51.039 N, 158 20.563 W - files : run.006, pro3h184.bin - note : Bloom station BT-2 (s12c1) Charging MPAK Checking MPAK : 1503 - voltage = 11.9 V (not sure whether it actually charged or not) - downloading : run.000, run.003, run.004 MPAK/FRRF cast - in:1547, down:1554, up:1619, out:1648 - depth : ~250m using ship's capstan - rate : ~10 m/min down, ~20 m/min up - weather : 2/8 clouds, 2-4' swells, 15 kt winds from 70 deg - location : 22 57.036 N, 158 41.187 W - files : run.008, pro4h184.bin - note : Bloom station BT-4 (s14c1) Checking FRRF : 1657 - time OK - voltage = 14.22 V - downloading data : pro3h184.bin, pro4h184.bin Checking MPAK data : - time OK - voltage = 11.3 V - downloading data : run.006, run.008 NOTES: There is a pin broken off within the MPAK Battery connector. We are still able to charge the battery, but we can't tell when it's charging and when it's not. We will try and repair it locally. If we are unsuccessful, it will have to be sent back to WetLabs for repair.