HOT-171 Optics Readme file NOTE: Receiving syncronization errors when using PRR. Suspect surface sensor cable. Unable to use PRR this cruise. Planning on sending it back for repair and calibration. 7/15/05 Charging MPAK & FRRF batteries : 1625 7/16/05 Checking FRRF : 1430 - time OK - voltage = 14.62V - re-formatting flashcard Checking MPAK : 1447 - re-set time - voltage = 12.6V - re-formatting flashcard - ready to calibrate! Cleaned AC-9 windows : ~1500 Calibrating AC-9 : 1515 temp = 28.4 deg C files: 05jul16a1.dat, 05jul16c1.dat, 05jul16c1.dat, run.000 note : Both channels seemed high! Checking MPAK : - re-set time - voltage = 12.5V - ready to sample! MPAK/FRRF cast - in:2224, down:2228, up:2252, out:2320 - depth : 250m using ship's trawl winch - rate : 10 m/min up/down - weather : night, 1/8 clouds, 2/3 moon, 14 kt winds, 2-4' swells - location : 22 45.189 N, 158 2.75 W - files : run.002, pro1h171.bin 7/17/05 MPAK/FRRF cast - in:1233, down:1241, up:1305, out:1330 - depth : 250m using ship's trawl winch - rate : 10 m/min up/down - weather : 3/8 clouds, 16-17 kt winds, 3-4' swells - location : 22 47.051 N, 158 2.010 W - files : run.003, pro2h171.bin Recharging MPAK : 1410 Checking FRRF : 1450 - voltage = 14.33V - time OK - space left = 5190574 words, used = 5295186 - downloading data : pro1h171.bin, pro2h171.bin - re-formatting flashcard - recharging battery 7/18/05 Checking MPAK : 810 - re-set time - voltage 13.2V - space left = 9681K - downloading data : run.000, run.002, run.003 MPAK/FRRF cast - in:1330, down:1337, up:1402, out:1430 - depth : 250m using ship's trawl winch - rate : 10 m/min up/down - weather : 2/8 clouds, 20 kt winds from 85 Deg, 4-6' swells - location : 22 47.043 N, 158 7.550 W - files : run.005, pro3h171.bin MPAK/FRRF cast (w/ filters) - in:1435, down:1442, up:?, down:1523, up:1536, out:1600 - depth : 250m using ship's trawl winch - rate : 10 m/min up/down - weather : 2/8 clouds, 206 kt winds fromm 90 Deg, 4-6' swells - location : 22 47.040 N, 158 7.546 W - files : run.006, pro3h171.bin - note : I went outside after 25 minutes expecting the cast to be at the bottom. I was surprized to find out it was almost at the top. My suspision was that the winch operator only sent it down to 150m, so I sent it back down to 250m. Checking MPAK : 1624 - voltage = 12V - downloading files : run.005, run.006 Checking FRRF : 1645 - time OK - voltage = 14.25V - downloading data : pro3h171.bin NOTE: In general, everything seemed OK.