HOT-147 Optics Readme file NOTE: MPAK back from Wetlabs. Hardware upgrades done. Past problems theorized to have been caused by a faulty communications cable. 4/22/03 Recharging MPAK battery pack : 9:30a - 12:48p (4/23/03) Recharging FRRF battery pack : 12:00n - 12:35p (4/23/03) 4/23/03 Checking FRRF : 1235 - time OK - voltage = 14.74 V, current = 0.091 A - re-formatting flashdisk Checking MPAK : 1248 - reset clock - voltage = 12.1 V - memory must have been cleared at Wetlabs 4/24/03 AC-9/FRRF cast - in:1258, down:1307, up:1332, out:1358 - depth : ~240m using 280m line & capstan - rate : ~10 m/min - weather : 22 kt winds, 6-10' waves, seastate 5, 5/8 clouds - location : 22 48.5463 N, 157 56.6257 W - files : run.000, pro1h147.bin After the cage was back on board, I noticed that the dark "caps" were not on the FRRF. Dark values are probably high due to light scatter. 4/25/03 AC-9/FRRF cast - in:304, down:310, up:336, out:402 (night) - depth : ~240m using 280m line & capstan - rate : ~10 m/min - weather : 19 kt winds, seastate 5 - location : 22 47.7767 N, 157 57.9272 W - files : run.001, pro2h147.bin Calibrated AC-9 : 440 - temp = 24.5 C - files : run.003, 03Apr25a1.dat, 03Apr25c1.dat, 03Apr25c2.dat Checking MPAK : 445 - reset clock - voltage = 11.1 V - downloading data: run.000, run.001, run.003 Recharging MPAK battery pack : 523 - 1142 Checking FRRF : 530 - advanced time 1 min. - voltage = 14.55 V, current = 0.090 A - space left = 4,948,655 - downloading data: pro1h147.bin, pro2h147.bin - re-formatting flashcard AC-9/FRRF cast - in:1203, down:1209, up:1235, out:1301 - depth : ~240m using 280m line & capstan - rate : ~10 m/min - weather : 19 kt winds, seastate 5, 8' swells, 6/8 clouds - location : 22 45.2819 N, 157 59.4953 W - files : run.005, pro3h147.bin AC-9/FRRF cast (w/ filter) - in:1310, down:1316, up:1341, out:1407 - depth : ~240m using 280m line & capstan - rate : ~10 m/min - weather : 19 kt winds, seastate 5, 7' swells, 3/8 clouds - location : 22 45.1187 N, 157 58.3518 W - files : run.006, pro3h147.bin Checking MPAK : 1430 - time OK - voltage = 11.0 V - downloading data: run.005, run.006 Checking FRRF : 1511 - time OK - voltage = 14.39 V, current = 0.091 A - downloading data: pro3h147.bin